Trusted By Awesome Clients

Case Introduction-Large shopping malls As a leading large-scale commercial complex in China, Wanda Plaza integrates shopping, dining, cinemas, entertainment, and offices. It has a large daily passenger flow, a large cleaning area, and long operating hours, which places extremely high demands on environmental hygiene and ground safety. The ground areas are diverse, including lobby entrances, passages in front of merchants, underground parking lots, escalator entrances, elevator halls, etc. Different areas pose comprehensive challenges to the flexibility, operating efficiency, and noise control capabilities of cleaning equipment.   To meet these multi-dimensional cleaning needs, the property team selected a combination of the Pinston ride-on floor scrubber PSD-XJ860 and the hand push floor scrubber PSD-XS530B, which are used for efficient cleaning of large main passages and local areas respectively, to ensure that the plaza's business environment is clean, safe and professional.   Why Choose PSD-XJ860 + XS530B for Commercial Complexes？ PSD-XJ860(ride on floor scrubber ) - Suitable for main channels and high-frequency areas The cleaning width is 860 mm, the squeegee width is 1200 mm, and the working efficiency is 8,000 square meters per hour. It is suitable for large areas such as the main channel of the lobby and the underground parking area. The noise is controlled between 65 and 68 decibels, which is suitable for operation during the business hours of the mall without affecting the customer experience. The rear-drive power system supports in-situ turning, with a small turning radius, and can flexibly pass through narrow areas. Equipped with a 140-liter fresh water tank and a 150-liter sewage tank, the battery life is 5 to 6 hours, reducing the frequency of water addition. The structure is solid, the sheet metal parts are sprayed with plastic to prevent rust, and the fasteners of the whole vehicle are 304 stainless steel, which can adapt to high humidity and high frequency environments.   PSD-XS530B (hand push floor scrubber) - suitable for corners, narrow areas and supplementary cleaning The brushing width is 530 mm, suitable for places that are difficult to cover manually, such as escalator entrances, elevator halls, narrow passages, corner areas, etc. Electric power-assisted pushing, equipped with a silent suction motor, quiet operation, suitable for operation during customer-intensive periods. Simple operation, easy for cleaning staff to use, suitable for daily shifts. Equipped with a 50-liter clean water tank and a 55-liter sewage tank, with a battery life of 3 to 4 hours, it meets the independent operation needs of small and medium-sized areas. Reasonable cost, as a supplementary coverage of driving equipment, effectively improves the overall cleaning integrity. Through the combination of driving and hand-push equipment, Wanda Plaza has achieved significant improvement in cleaning efficiency in daily operations, reduced labor input, and a more unified overall environmental image, creating a clean, safe and comfortable consumer experience for customers.   If you are also operating large shopping malls, shopping centers, commercial complexes and other places, please consult the Pinston team to obtain professional cleaning equipment configuration solutions and on-site demonstration services. Case Introduction-Hospitals Anhui Provincial Hospital is one of the largest and highest-level tertiary comprehensive hospitals in Anhui Province, with an average daily outpatient and emergency volume of more than 10,000 people. The hospital building is large in size and has complex functional areas, covering high-traffic areas such as outpatient halls, waiting areas, inpatient wards, examination departments, and underground passages. The types of ground pollution are diverse, which places extremely high demands on cleaning efficiency, quietness, and operational safety.   In order to further improve the cleaning work standards and optimize the hospital's environmental sanitation management system, the hospital's logistics department introduced the Pinston Walk beind floor scrubber PSD-XS530B for daily cleaning operations in public areas on multiple floors. Why Choose PSD-XS530B for Tertiary Hospitals? In a comprehensive large hospital, cleaning operations need to be highly efficient and low-interference under the premise of dense patients, sensitive environment, and complex space. PSD-XS530B is a professional cleaning equipment tailored for such scenarios. 1. Adapt to the needs of multiple scenarios in hospitals 530mm floor washing width + 830mm water suction squeegee design, suitable for multiple typical areas such as outpatient hall, medical technology building corridor, elevator antechamber, infusion waiting area, ward passage, etc., one machine is universal, fast and flexible. 2. Strong suction + dry mopping synchronization to avoid slippery risks Adopting high-performance water suction motor and exclusive float assembly, it can suck up sewage while cleaning, and the ground can be directly passed after cleaning, which can maximize the safety of patients, medical staff and family members. 3. Low noise, suitable for sensitive environment operation With our energy-saving ECO mode, the noise is lower, and the built-in silent cotton wrapped suction system can be operated in the inpatient building or night duty area without affecting patients' rest or doctors' diagnosis and treatment. 4. Solid configuration, stable and durable Equipped with Hengye brush motor, Amedge suction motor, Lynch controller, high-strength 6mm clean water tank and 8mm steel chassis, it supports high-frequency operation in hospitals, stable and reliable, and has a long service life. 5. Friendly operation, convenient for shift handover The equipment operation panel is clear and easy to implement, suitable for logistics cleaning personnel of different ages to quickly master, reduce handover training costs, and improve team response efficiency. 6. Suitable capacity and sufficient battery life Equipped with 50L clean water tank and 55L sewage tank, it can work continuously for 3-4 hours without frequent water addition and replacement, which is suitable for centralized cleaning tasks such as medical technology areas and floor passages. By deploying Pinston PSD-XS530B, Anhui Provincial Hospital has not only greatly improved the quality and efficiency of floor cleaning, but also ensured the professional standards of the overall public health environment of the hospital, and effectively supported the logistics cleaning capabilities of "Grade 3" hospitals under high-intensity operations. If you are also looking for cleaning efficiency improvement solutions for high-standard places such as hospitals, rehabilitation centers, medical and nursing institutions, please contact the Pinston team. We will provide you with professional and customized one-stop cleaning solutions.

Client Nature and Business Zhengzhou Railway Station is the core system of urban rail transit in the Central Plains region and undertakes the backbone function of national public transportation. The station area is densely populated, the operation is frequent, and the average daily passenger flow is huge, which puts forward continuous and high standards for the hygiene, safety and cleaning efficiency of public areas. Customer scenario characteristics The station area has multiple functional areas such as the station hall, platform, elevator entrance, ticket area, and passageway. The floor is mostly made of marble or epoxy material, with frequent traffic and complex pollution sources, such as shoe prints, water stains, dust, and beverage residues. Cleaning needs to be completed quickly and avoid slippery. Floor material Large areas of smooth floor tiles and stone floors need to prevent water accumulation and keep them smooth. When cleaning, ensure that the floor dries quickly to avoid slipping. Equipment and models The equipment put into use is the Pinston walk behind floor scrubber PSD-XS530B and ride on floor scrubber PSD-XJ860pro , which are used for daily cleaning and maintenance of public areas within the station.  

Weichai Lovol Heavy Industry is a well-known domestic engineering machinery and agricultural equipment manufacturing company with heavy production tasks and intensive production lines. The overall plant area is large, and the working environment is mainly hardened floor. The ground is always exposed to typical industrial pollution such as dust, oil stains, and iron filings, which places high demands on the efficiency, strength and stability of cleaning equipment.   The cleaning areas are mainly distributed in the main workshop of the factory, the material transfer area, the surrounding area of the welding line and the outdoor concrete floor. The overall ground is flat but the area is very large, and people and forklifts pass through together. The equipment is required to be wear-resistant, have strong suction, be flexible in turning, and support high-frequency all-weather operations. Ground area The overall cleaning area of the factory exceeds 100,000 square meters. The operation areas are scattered and the cleaning tasks are continuous, requiring multiple devices to work together and cover efficiently. Equipment configuration and quantity Equipped with 10 PSD-XJ860 rear motor drive ride-on floor scrubbers and PSD-XJ9600 large ride-on floor scrubbers  to meet the cleaning needs of different areas. PSD-XJ860 (rear motor drive scrubbers) - Suitable for medium and large channels and high-frequency operation areas The cleaning width is 860 mm, the squeegee width is 1200 mm, and the cleaning efficiency of a single machine reaches 8000 square meters per hour, which is suitable for large-area scenes such as the main passage of the workshop and the road between material areas. The rear-wheel drive structure has flexible steering, supports turning on the spot, and has a small turning radius, which is suitable for interspersed operations in areas with dense equipment or driving passages. Equipped with a 140L clean water tank and a 150L sewage tank, the battery life is 5 to 6 hours, which is suitable for continuous high-frequency operations and reduces the frequency of mid-way downtime. The operating noise is less than 68 decibels, which does not interfere with the operation of other equipment in the workshop, and cleaning tasks can be carried out in parallel during production. The whole machine has a solid structure, the body sheet metal is sprayed with rust-proof, and the accessories are made of 304 stainless steel, which is suitable for industrial environments with frequent oil, moisture and dust.   PSD-XJ9600 (front motor large ride-on floor scrubber) - Suitable for cleaning work in large areas The brush plate width is 1060 mm, the squeegee width is 1200 mm, and it can complete cleaning tasks of more than 10,000 square meters per hour, which is particularly suitable for large-area cleaning of hardened floors. Equipped with a double-brush motor and a high-power water absorption system, the 55 kg brush plate pressure is more advantageous in dealing with stubborn stains, and can effectively remove oil stains, metal chips, and mud-water mixtures. The clean water tank is 240L, the sewage tank is 260L, and the single-charge life is 7 to 8 hours, supporting multiple rounds of operation throughout the day. The rear-wheel drive design enhances the climbing ability and load-bearing stability, and the LCD screen intelligent display system allows the operator to grasp the operating status in real time. The standard high-pressure water gun and water tank self-cleaning system improve the convenience of cleaning and facilitate the rapid washing of residues or equipment surfaces in the workshop.